PRE-ORDER 125 mm Infinity Taillights Kit x4

Please Note: These kits take a long time to make and are made to a very high standard. There will be longer wait times than usual, expect 45-60 calendar day waits before shipping (Subject to demand). If you would Like to place a deposit of $400 this will reserve right to next available stock on hand after all PRE-ORDERS have been processed. Please contact us directly to arrange this.

The Triad135 is a plug and play LED taillight kit. The kit comes with driving mode setup so that you can plug your indicators, brakes, reverse and parker inputs from your vehicle into the box (Screw in rail). All colour / sound reactive or other modes can be controlled over Wi-Fi. Driving styles are fully customisable, Luxury Lighting offers multiple Pre-Configured driving styles that can be downloaded and installed over Wi-Fi to your lights. The option you select at checkout can be changed anytime by you and is just pre-installed.

The Triad 135 is 3 LED loops consisting of 135 LEDS per module and is 135mm in diameter from the outer most edges.

FUNCTIONS:

1. White Reversing Lights
2. Amber Indicator Lights
3. Red Parker Lights
4. Red Brake Lights
5. 10 Colour Modes via App
6. 5 Sound Reactive Modes via App

CONTENTS:

1. 4x Infinity Taillight Modules
2. 1x Control Box

LED TAIL LIGHT SPECIFICATIONS:

• Chemical ABS black finish
• Water Resistant
• Input Voltage Range of 12-24 Volt
• Max Amp Draw of 30 amps at full white light, 9 amps draw at full Red,Green or Blue. These will flatten a car battery if left on full white for hours.
• Waterproof Control Box is 170mm x 120mm x 50mm
• IP67 deutsch connectors and grommets
• 2 metre braided wiring harness from the control box to the taillight modules
• 1 Year Warranty  (Manufacturer Defects).
• Light Modules are 125 x 125mm x 80mm (125mm refers to hole diameter, Lip edge is 135mm)
• Easy installation screw on housing, no bolts or fasteners required.
• 2x led load resistors for indicators.
• 3 metres 30 amp red cable with inline fuse and and switch

*Note

Since these are highly advanced Taillights, these require a good solid connection to your battery so included in the kit is a 5 metres of positive cable which you will need to run directly to your positive terminal on your battery. Inline with this positive cable is a fused relay which will need to be wired into the stereo ignition wire (located behind your stereo) to shutoff power to the taillights when your ignition is switched off. The lights need to be switched off because the residual power draw they pull is enough to flatten the battery in 10 hours. The earth (negative) cable will just be bolted to the chassis.

All of the above is set out in the Manual in more detail with photos.

View Gallery for Driving Variations and other demos.

*Note: Afterpay is available upon request, it is currently not setup at checkout.